Components Needed: ESP32 development board DHT11 temperature and humidity sensor Jumper wires Breadboard (optional) Step 1: Setup the Hardware Connect the DHT11 Sensor to the ESP32: Connect the VCC ...
// Connect pin 2 of the sensor to the data pin defined on your Arduino // Connect pin 4 of the sensor to GND // Connect a 10K resistor between pin 2 (data) and pin 1 (VCC) of the sensor ...
Rick] had a problem. His garage refrigerator was tasked with a critical duty—keeping refreshing beverages at low temperature.
Abstract: The aim of this work is to implement an innovative Weather Monitoring system and real-time alert system sing IoT. Monitoring temperature (t) and humidity with a sample size of 10 values with ...
I wanted a simple weather monitor that can display the current temperature, humidity, and heat index to keep tabs on my ambience. Naturally, a cheap eBay gizmo would do, but I decided to build my own ...
Numerous studies have shown that the indoor temperature and relative humidity at workplace significantly impacts workers’ comfort and productivity. The first step towards optimizing these two ambient ...
Abstract: CattlеSеnsе is an innovative application of Internet of Things (IoT) technology for the comprehensive monitoring and management of cattle well-being. This research paper outlines the design ...
Some results have been hidden because they may be inaccessible to you
Show inaccessible results